Mobile-But-Secure Benchtop Tools
Shazam! Fasten your bench-top tools to your workbench in seconds. Bolt 3/4-in. plywood bases on the tools and then glue and screw a wood strip along the front edge to fit into a woodworking vise. Crank this strip into a vise to lock the tool into place. If you don’t have a vise, drill a couple of clearance holes along the face of the wood strip on the base and drive screws through the strip into the edge of your workbench. Then just unscrew to remove the tool.
Pencils at the Ready
Reader R. B. Himes sent several cool tips for keeping pencils handy. Insert pencils into holes drilled in the edges of shelves, or put small screw eyes into the erasers and hang ’em from nails. Reader Jerry Seaward has another: Glue a scrap of window screen to the bottom of a piece of 1-1/2 in. dia. PVC pipe and clamp or screw the pipe to your workbench for a dust-free pencil holder. Other pencil hangouts? Wrap a strip of self-stick Velcro around a pencil and put a corresponding strip wherever you need a pencil. To make a pencil stay put on metal surfaces, attach a piece of magnetic tape ($2 a roll at fabric stores) to it.
Need another? Buy plastic coaxial cable holders ($2 for a 20-pack), reverse the brad direction and tack ’em on the side of a work-table or tool rack. You can quick-draw the pencils out of the plastic jaws. Or try adding a piece of tape the end of a pencil to stop it from rolling around.