2. Chisel Corral
Where’s the 1⁄2-in. chisel?
When all the handles of your chisels look alike, you’ve got to see the blades, too. Grabbing the right size is easy with this open rack. The long slot allows you to store chisels with blades wider than the holes. The bottom shelf prevents you from brushing up against sharp edges.
Make the rack by ripping three lengths of wood from one wide board. Cut the center piece 3⁄8-in. wide, then clamp them back together (without glue). Drill 5⁄8-in. dia. holes spaced 2-in. apart down the middle of the center piece. Unclamp the three pieces. Crosscut the center piece to make three short bridges, one from each end and one from the middle. Glue the wide board back together with the bridges separating the outer boards.
Cut 3⁄8-in.-deep dadoes into the 3⁄4-in. uprights and shelf. Reinforce with screws from the back.